CVE-2026-80819
N/A
Summary
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: RFCOMM: take rfcomm_mutex for the deferred setup accept
rfcomm_sock_recvmsg() completes a deferred setup by calling rfcomm_dlc_accept() without holding any RFCOMM lock:
if (test_and_clear_bit(RFCOMM_DEFER_SETUP, &d->flags)) {
rfcomm_dlc_accept(d);
return 0;
}
and rfcomm_dlc_accept() dereferences the session on its first line:
struct sock *sk = d->session->sock->sk;
Every other path that touches d->session runs under rfcomm_mutex: rfcomm_dlc_open(), rfcomm_dlc_close(), rfcomm_dlc_exists(), rfcomm_dlc_send_rpn(), and the RFCOMM thread through rfcomm_process_sessions(). rfcomm_connect_ind() is even documented as "called under rfcomm_lock()". This call site is the only one that skips it.
The RFCOMM_DEFER_SETUP bit looks like it serialises the accept against teardown, since __rfcomm_dlc_close() returns early when it wins the test_and_clear. But rfcomm_recv_disc() forces the state first:
d->state = BT_CLOSED;
__rfcomm_dlc_close(d, err);
and the early return only covers BT_CONNECT, BT_CONFIG, BT_OPEN and BT_CONNECT2. With the state already BT_CLOSED that switch does not match, the bit is never consulted, and __rfcomm_dlc_close() falls through to rfcomm_dlc_unlink(), which sets d->session = NULL.
So a remote DISC on a deferred dlc clears the session while leaving RFCOMM_DEFER_SETUP set. The next recvmsg() then passes the test_and_clear and dereferences a NULL session. No timing window is needed: once the DISC has been processed, the dereference is unconditional.
Give rfcomm_dlc_accept() the same shape as rfcomm_dlc_open() and rfcomm_dlc_close(): an exported wrapper that takes rfcomm_mutex and re-checks the session, around a __rfcomm_dlc_accept() that the two in-core callers, which already hold the mutex, keep using.
Reproduced on a KASAN + PROVE_LOCKING kernel with a BR/EDR peer emulated over /dev/vhci: the peer brings up an ACL link, opens L2CAP on the RFCOMM PSM, starts a session, opens a dlc on a channel bound with BT_DEFER_SETUP, and sends DISC after the socket is accepted. recv() on the accepted socket then hits:
Oops: general protection fault KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] RIP: 0010:rfcomm_dlc_accept+0x54/0x350 Call Trace: rfcomm_sock_recvmsg+0x1cd/0x230 sock_recvmsg+0x166/0x1c0 __sys_recvfrom+0x20d/0x300
0x10 is the offset of sock in struct rfcomm_session. With this patch the same run completes with recv() returning 0 and no report, and lockdep stays quiet, confirming rfcomm_mutex is still taken before lock_sock on this path as it is on the thread side.
Affected Software
| Vendor | Product | Version Range | Status |
|---|---|---|---|
| Linux | Linux | bb23c0ab824653be4aa7dfca15b07b3059717004 < d8d686dd5662a7c4745e4515f1237a9f3b7df181 | affected |
| Linux | Linux | bb23c0ab824653be4aa7dfca15b07b3059717004 < eb71d5a1ea8ff2683e394b48ae3cd676037ab4c2 | affected |
| Linux | Linux | bb23c0ab824653be4aa7dfca15b07b3059717004 < 56f0aa75c7640e46397ef73bea251fcbef9150c0 | affected |
| Linux | Linux | bb23c0ab824653be4aa7dfca15b07b3059717004 < 362726c9c6e56eea4262109183e49868c39ccd3a | affected |
| Linux | Linux | bb23c0ab824653be4aa7dfca15b07b3059717004 < 825b95561d7b7c393df9e7bc295451aaeadc3d18 | affected |
| Linux | Linux | bb23c0ab824653be4aa7dfca15b07b3059717004 < d4b1a13b1eff2e80925c7368ffdeaaa50cba93df | affected |
| Linux | Linux | bb23c0ab824653be4aa7dfca15b07b3059717004 < 355bfd57ca4ca881c6eb03ca813b440a094b1f44 | affected |
| Linux | Linux | bb23c0ab824653be4aa7dfca15b07b3059717004 < b405c2f96ae2e37375105881890f7738833b1d62 | affected |
| Linux | Linux | bb23c0ab824653be4aa7dfca15b07b3059717004 < 43a556b2fd43f2df6dded59c2e26560a27874c24 | affected |
| Linux | Linux | 2.6.30 | affected |
| Linux | Linux | 0 < 2.6.30 | unaffected |
| Linux | Linux | 5.10.267 <= 5.10.* | unaffected |
| Linux | Linux | 5.15.218 <= 5.15.* | unaffected |
| Linux | Linux | 6.1.185 <= 6.1.* | unaffected |
| Linux | Linux | 6.6.154 <= 6.6.* | unaffected |
| Linux | Linux | 6.12.106 <= 6.12.* | unaffected |
| Linux | Linux | 6.18.47 <= 6.18.* | unaffected |
| Linux | Linux | 7.1.11 <= 7.1.* | unaffected |
| Linux | Linux | 7.2.1 <= 7.2.* | unaffected |
| Linux | Linux | 7.3-rc1 <= * | unaffected |
Weaknesses
References
- https://git.kernel.org/stable/c/d8d686dd5662a7c4745e4515f1237a9f3b7df181
- https://git.kernel.org/stable/c/eb71d5a1ea8ff2683e394b48ae3cd676037ab4c2
- https://git.kernel.org/stable/c/56f0aa75c7640e46397ef73bea251fcbef9150c0
- https://git.kernel.org/stable/c/362726c9c6e56eea4262109183e49868c39ccd3a
- https://git.kernel.org/stable/c/825b95561d7b7c393df9e7bc295451aaeadc3d18
- https://git.kernel.org/stable/c/d4b1a13b1eff2e80925c7368ffdeaaa50cba93df
- https://git.kernel.org/stable/c/355bfd57ca4ca881c6eb03ca813b440a094b1f44
- https://git.kernel.org/stable/c/b405c2f96ae2e37375105881890f7738833b1d62
- https://git.kernel.org/stable/c/43a556b2fd43f2df6dded59c2e26560a27874c24
Feedback
Was this page helpful?
Glad to hear it! Please tell us how we can improve.
Sorry to hear that. Please tell us how we can improve.